# 4.8 Load and Run your Cue

With **position and timing** both set for each movement within the cue, let's **load** the cue, and then **run** it. This is a two step process to make sure you are safely moving the machines you intend to move.

{% hint style="warning" %}
Notice that the color of the cue and each unit in the model viewer changes, depending on the status.
{% endhint %}

* **RED:** Movement is loaded and ready to go!
* **GREEN:** Movement is moving to the target location.
* **BLUE:** Movement is complete.

![](https://3040525219-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MhFI6SSKpm8M7EkrYqp%2Fuploads%2Fgit-blob-fcb958a6bb8bf3cc5aa0861465cfd5b2fc73e46e%2FSM_QS_NS_RunCue.gif?alt=media)

1. **Click** the **Load Icon** in the top left corner of **Cue 2.**
2. **Click** the **GO Icon** in the lower right corner of the screen.