Getting Started
Last updated
Last updated
Congratulations on your purchase of the Stagehand Hydraulic from Creative Conners, Inc. The Stagehand Hydraulic is a purpose-built motion controller for hydraulic effects using Spikemark software. The Stagehand Hydraulic is designed to control a single proportional valve connected to a fixed speed hydraulic pump. To turn the pump on and off, you may need additional controls, such as a Stagehand FX. The Stagehand Hydraulic incorporates the valve power supply, safety interlock circuitry, and motion controller all in a 3U rack enclosure. Tiny is mighty, this one product now replaces 3 products to control a hydraulic effect while incorporating bumper switches and interlocks to keep motion safe. The Stagehand Hydraulic is the only controller you need to Make It Move!, hydraulic style. This manual will guide you through:
Unpacking
Installation
Powering up
Operation
Troubleshooting
If you need any help along the way, contact us!
Phone: 401-289-2942 x2
Stagehand Hydraulic Motion Controller
5 ft. IEC power cord
2 Interlock safety jumpers
2 auxiliary limit jumpers
#10-32 rack mount screws with nylon washers (x4)
Give us a call or drop an email if any of these parts are missing.
Online:
Email: