# Setting the Limits

The Pushstick v2 has up to four physical limits depending on the machine wiring: FWD ULT, FWD, REV, REV ULT. See the limit table below for details.

| Limits  | Apprentice & Classic | Pro |
| ------- | -------------------- | --- |
| FWD     | X                    | X   |
| REV     | X                    | X   |
| FWD ULT |                      | X   |
| REV ULT |                      | X   |
|         |                      |     |

The limits are actuated by the block attached to the end of the drum’s acme rod. All four of these limits are adjustable.

To adjust the limits, loosen the socket head cap screw attaching the limit to its track with a 5/32” allen key. Move the limit to your desired position and re-tighten the socket head cap screw to set the limit into place on the track.

Sometimes pictures are better than words - take a look at the slideshow below for guidance.

{% embed url="<https://docs.google.com/presentation/d/e/2PACX-1vS_07uUuwV5jJa5gs9SH0OljEVirnPjbxRHXvOOI5sT_MwVC-UIzNkCa_zvz2can_pVSdcBI89bLGRW/pub?delayms=3000&loop=false&start=false>" %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.creativeconners.com/docs/machinery/pushstick/setting-the-limits.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.