Specifications
Physical Specifications
Description
Value
Max Line Pull
160lb
Max Line Speed
24in/s
Wire Rope Size
1/8”
Wire Rope Capacity
60’ per drum (in addition to (6) safety wraps)
Machine Weight
170lb
Overall Dimensions
18” H x 51” W x 12” D
Electrical Specifications
Description
Value
Input Voltage
200-240VAC 50/60Hz
Max Input Current
14A
Load Brake Voltage
105VDC
Maintenance Schedule
Like any machine, the Spotline Mini requires regular maintenance to stay operating at full capacity.
Daily Operation
Ensure the encoder is counting correctly.
FWD - Encoder Counts Up.
REV - Encoder Counts Down.
Confirm that cable is wrapping onto the drum correctly.
Maintaining less than 1.5 degree fleet angle.
Cable is not cross grooved.
Monthly
Visually inspect all drums, cables, pulleys used in the system are free from wear.
All components with excessive wear should be addressed as soon as possible.
Visually inspect and verify that the cable keeper is under tension and resting against the cable on the drums.
If not, make sure that your cable is not cross grooved and that the tensioning springs are attached.
Check Forward and Reverse Limits.
Perform the brake test as outlined above.
Semi-Annually
Visually inspect the drive chain and verify that the chain is tensioned so that there is more than 1/16” but less than 1/8” of deflection in the drive chain from when the drive chain is at rest to pulling the drive chain taut.
Ensure that the drive chain guards are tight and in place.
Ensure the drum key is engaged.
Ensure the brake key is engaged.
Set screws (4) 2 on each drum (2) are tight.
Drawings
Last updated