> For the complete documentation index, see [llms.txt](https://docs.creativeconners.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.creativeconners.com/docs/machinery/turntable-template/bill-of-materials.md).

# Bill Of Materials

The following is a list of the materials required to make this 20’ turntable.

## Materials Estimate

You can expect to spend **\~$7,100.00** in materials for this 20'-0" turntable.

### Spider

<table><thead><tr><th width="150" data-type="number">Qty</th><th>Description</th><th data-type="number">Unit Price</th><th>Extended Price</th></tr></thead><tbody><tr><td>96</td><td><a href="https://www.mcmaster.com/20115T24/">Casters 5"- 500# Cap - Durometer 85A</a></td><td>34.24</td><td>$3,287.00</td></tr><tr><td>5</td><td><a href="https://www.lowes.com/pd/AC-Plus-23-32-in-Common-Radiata-Pine-Sanded-Plywood-Application-as-4-x-8/50100638">3/4" AC Plywood 4' x 8' *</a></td><td>69.98</td><td>$349.90</td></tr><tr><td>1</td><td><a href="https://www.lowes.com/pd/1-4-in-BC-Pine-Plywood/1003140510">1/4" Sanded Ply 4' x 8'</a></td><td>41.52</td><td>$41.52</td></tr><tr><td>384</td><td><a href="https://www.mcmaster.com/92865A626/">3/8"-16 x 1-1/4" Hex Bolt</a></td><td>0.29</td><td>$111.36</td></tr><tr><td>384</td><td><a href="https://www.mcmaster.com/91247A628/">3/8"-16 x 1-1/2" Hex Bolt</a></td><td>0.33</td><td>$128.26</td></tr><tr><td>768</td><td><a href="https://www.mcmaster.com/90108A417/">3/8" Washer</a></td><td>0.07</td><td>$53.76</td></tr><tr><td>768</td><td><a href="https://www.mcmaster.com/91102A760/">3/8" Lock Washer</a></td><td>0.07</td><td>6</td></tr><tr><td>768</td><td><a href="https://www.mcmaster.com/90975A031/">3/8"-16 T-Nut</a></td><td>0.43</td><td>$330.24</td></tr><tr><td>8</td><td><a href="https://www.mcmaster.com/91247A721/">1/2"-13 x 2-1/4" HHCS</a></td><td>0.95</td><td>$7.58</td></tr><tr><td>8</td><td><a href="https://www.mcmaster.com/98025A133/">1/2" washer</a></td><td>0.53</td><td>$4.21</td></tr><tr><td>8</td><td><a href="https://www.mcmaster.com/91102A770/">1/2" Lock Washer</a></td><td>0.15</td><td>$1.18</td></tr><tr><td>8</td><td><a href="https://www.mcmaster.com/90975A304/">1/2"-13 T-Nut</a></td><td>0.86</td><td>$6.84</td></tr><tr><td>null</td><td></td><td>null</td><td><strong>$4,375.65</strong></td></tr></tbody></table>

### Turntable Lid

<table><thead><tr><th width="150" data-type="number">Qty</th><th width="199">Description</th><th width="189">Unit Price</th><th>Extended Price</th></tr></thead><tbody><tr><td>29</td><td><a href="https://www.lowes.com/pd/AC-Plus-23-32-in-Common-Radiata-Pine-Sanded-Plywood-Application-as-4-x-8/50100638">3/4" AC Plywood 4' x 8' *</a></td><td>69.98</td><td>$2,030.00</td></tr><tr><td>572</td><td><a href="https://www.mcmaster.com/90273A544/">1/4"-20 x 1-1/4" FHPS **</a></td><td>0.16</td><td>$91.98</td></tr><tr><td>72</td><td><a href="https://www.mcmaster.com/90273A572/">1/4"-20 x 4" FHPS **</a></td><td>0.35</td><td>$24.87</td></tr><tr><td>644</td><td><a href="https://www.mcmaster.com/90975A029/">1/4"-20 T-Nut</a></td><td>0.14</td><td>$92.90</td></tr><tr><td>644</td><td><a href="https://www.mcmaster.com/91555A101/">#6 x 1/2" Wood Screws</a></td><td>0.08</td><td>$49.59</td></tr><tr><td>12</td><td><a href="https://www.mcmaster.com/91253A721/">1/2"-13 x 2-1/4" FHCS</a></td><td>1.29</td><td>$15.48</td></tr><tr><td>0</td><td><strong>**Optional**</strong></td><td></td><td></td></tr><tr><td>6</td><td><a href="https://www.onlinemetals.com/en/buy/aluminum/0-125-x-4-aluminum-rectangle-bar-6061-t6511-extruded/pid/1131">1/8" x 4" Aluminum Bar 12' L</a></td><td>56.60</td><td>$351.80</td></tr><tr><td>null</td><td></td><td></td><td><strong>$2,655.61</strong></td></tr></tbody></table>

\* Plywood should have at least (1) A graded face veneer to provide a smooth rolling surface for the wheels. If using hardwood plywood $ (e.g. birch, poplar, maple, etc.), then lower face veneer grades may be acceptable. If using MDO $$, then treat the better side as you would face grain.

\*\* Alternate hardware options are similar sized flat head cap screws (FHCS), but these are more expensive. They also have a larger diameter head, so adjust countersink depth accordingly.

## Material Sourcing Notes

* Plywood is linked with Lowe’s as the supplier, but you can likely get better pricing and delivery options from your local lumber yard. Pricing will vary depending on location. Above is pricing as of May 2022.
* Additional lumber is required if you want to construct square platforms to surround the turntable.
* If you are outsourcing your CNC cut plywood parts, you may want to ask about buying plywood through that vendor as they may get better pricing and could simplify shipping.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://docs.creativeconners.com/docs/machinery/turntable-template/bill-of-materials.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.